Toshiba Strata CIX670 Rack Mount

 Top  Previous  Next

Most Visited: Toshiba's All New IP5000 Series Phones | CIX40i: Big Features for Small Businesses and Branch Offices | Toshiba eManager FAQ | Toshiba CIX Business Phone Systems Product Line

The Strata CIX Rack Mount cabinets consist of a Base cabinet (CRSUB672A) and Expansion cabinets (CRSUE672A). These cabinets are deeper, narrower, and designed specifically to fit standard (customer-supplied) 19” racks (shown right). The cabinets are made of plated sheet metal, dark gray in color with black cover plates. These cabinets support the same features as the floor/wall-mountable CIX670 cabinets.

A CIX670 system can expand from one to seven cabinets using the same processors and interface cards as the CIX670 floor/wall-mountable cabinets. The power factors and slot configuration rules are also the same as the floor/wall­mountable CIX670.

The difference between the floor/wall mount and the rack mount cabinets is the size for the Base and Expansion cabinets, the power supply that is installed in the cabinets, and a unique power strip for rack mount cabinets (BRPSB 1 20A and the 240V version).

Toshiba does not support mixing the floor/wall-mountable CIX670 cabinets with the rack mountable cabinets. The 19 inch-wide rack and rack screws must be supplied by the dealer. Interface cables plug into the front of the station and trunk cards and fold under each cabinet to exit the rear of the cabinets.

 

Basic Specifications

The following table lists the parts and basic specifications of the CIX670 Rack Mount Cabinets.

Dimensions of Base (CSRUB672A)
and Expansion (CSRUE672A)
Cabinet

Height: 10.5 inches (267mm)
Width: 1.58 feet (483mm—with bracket)
Depth: 1.17 feet (358mm)

Weight of Base and Expansion
Cabinet

22.04 lbs. (10 kg)

Power Supply Unit (PSU)

BRPSU672A (initially built in) – can also be ordered for spares

19" Rack Installation Dimension

IEC297-1 (EIA RS 310-D)
465.1mm (front face screw pitch – width)

Installation

Cannot be floor or wall mounted.

Optional Equipment

Power Strip Box1

BRPSB120A

BRPSB240A

Reserve Power Battery Distribution Box2

BBDB1A

From PSU to Battery Cable

PBTC 1A-3M

From BBDB to Battery Cable

BBTC1A-2.0M

AC240V Power Supply Cord

BACL240A

 

1.Power strip boxes for floor/wall-mountable cabinets cannot be used for Rack Mount cabinets.
2.Reserve batteries are connected using the same battery distribution box and battery cables as the CIX670 floor/wall-mountable cabinets.

 

CIX Base Cabinet

The CIX670 rack mount base cabinet is similar to the Strata CIX670 wall mount base cabinet. It has two dedicated slots used for the system processor cards and eight universal slots, labeled

“S 101-S 108,” that can accommodate station, CO line or option circuit cards. It also houses a power supply. See Figure 9.

Figure 9        Strata CIX670 Rackmount Base Cabinet Interior

CIX Expansion cabinet

Each expansion cabinet provides 10 slots (S_01-S_10). Figure 10 shows an Expansion Cabinet.

Figure 10 Strata CIX670 Rackmount Expansion Cabinet Interior

 

This chapter contains Strata CIX40, CIX100, CIX200 and CIX670, and capacities for stations and peripherals, CO lines, station buttons and system features. All tables apply to all systems unless otherwise noted.

 


























KTS CUSTOMER USER GROUP RESOURCES | TOSHIBA CIX PHONE SYSTEMS
Sponsors Web Site | http://www.ip-office-telephone-systems.com
Telephone Number | (888) 4-TOSHIBA
Telephone Equipment Service Area By California County:
Los Angeles, Orange, Riverside, San Bernardino, San Diego
Site Managed By | ABCI Web Marketing