|
Tones which can be heard from speaker or handset are described in Table 43.
Table 43 Call Progress Tones
Tone Name
|
Conditions
|
Ringing Cadence
|
Prime Dial Tone
|
Prompting to dial [DN] or access code or to press a feature button or to dial 9 +
number.
|
350/440Hz continuously On.
|
Secondary Dial Tone (optional)
|
Prompting to dial [DN] or access code or to press a feature button, with someone on Consultation Hold.
|
DND-Stuttered Dial Tone (optional)
|
Same as Prime Dial Tone with implication of DND activated. MW-Stutter dial tone has priority over this tone.
|
480/620Hz 0.125 sec. 4 bursts apart 0.125 sec., 350/440Hz 3 sec. On, repeat.
|
MW-Stuttered Dial Tone
|
Same as Prime Dial Tone with implication of MW received. This tone has a priority over DND-Stutter dial tone.
|
350/440Hz 0.1 sec. 5 bursts apart 0.1 sec., 3 sec. On, repeat.
|
Entry Tone
|
More digits are required such as account codes, some indexes, etc.
|
350/440Hz, 0.1 sec. 3 bursts apart 0.1 sec.
|
Ring Back Tone
|
Ringing the destination
|
440/480 Hz 1 sec. On, 3 sec. Off, repeat.
|
Success Tone (Confirmation Tone)
|
Operation was successfully accepted.
|
350/440 Hz, 3 bursts of 0.125 sec., apart 0.125 sec.
|
Reject Tone
|
Operation was rejected. After this tone is done, the original conversation is resumed.
|
1209 Hz 0.25 sec., 500 Hz 0.25 sec., 3 times.
|
Busy Tone
|
Destination is busy. Invoke desired feature or retry later.
|
480/620 Hz, 0.5 sec. On, 0.5 sec. Off, repeat.
|
Reorder Tone
|
Either the operation failed or the call is terminated. Hang up.
|
480/620 Hz, 0.25 sec. On, 0.25 sec. Off, repeat.
|
DND Tone
|
The destination is in the Do Not Disturb mode.
|
480/620 Hz, 0.125 sec. On, 0.125 sec. Off, repeat.
|
Splash Tone
|
Voice calling starts. Applicable to Voice Paging and Speaker OCA.
|
500 Hz, 1.0 sec. On.
|
Barge-in Warning Tone
|
Somebody is listening to (monitoring) the conversation.
|
440 Hz 1.0 sec. On.
|
External Call
Waiting Tone for Standard Telephone
|
An external call is waiting. This tone is sent to the receive party only.
|
1209 Hz, 2 bursts of 0.16 sec. apart 0.16 sec., twice, 3 sec. apart.
|
Internal Call Waiting Tone for Standard Telephone
|
An internal call is waiting or somebody is listening to (monitoring) the conversation.
|
1209 Hz, 2 bursts of 0.5 sec. On, apart 3.0 sec.
|
Ring tones are described, along with their cadences in Table 44. Due to the limitation in the tone generation algorithm, the listed tone duration is slightly different from the actual one.
Table 44 Ring Tones
Tone Name
|
Description
|
Ringing Cadence
|
Internal/External Ring 1
|
Incoming call from internal or external
party to DP or IPT. (10 different ring
tones are available with R1.3 or higher
software.)
|
500 Hz 1 sec. On, 3 sec. Off, repeat
|
Internal/External Ring 2
|
1300 Hz 1 sec. On, 1 sec. Off, repeat
|
Internal/External Ring
11
|
500/640 Hz 1 sec. On, 3 sec. Off, repeat
|
Internal/External Ring
12
|
500/640 Hz 1 sec. On, 1 sec. Off, repeat
|
Internal/External Ring
13
|
860/1180 Hz 1 sec. On, 3 sec. Off, repeat
|
Internal/External Ring
14
|
860/1180 Hz 1 sec. On, 1 sec. Off, repeat
|
Internal/External Ring
15
|
1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
|
Internal/External Ring
16
|
1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
|
Internal/External Ring
17
|
860/1180 Hz 0.5 sec. On, 1300/1 780 Hz 3
sec. Off, repeat
|
Internal/External Ring
18
|
860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1
sec. Off, repeat
|
External/Internal Ring
for Standard
Telephones
|
Internal and External Ringing Cadence:
For Release 1.3 and higher, two types of
ringing cadences can be selected in
system programming.
|
Ringing Type1: External Ring: 20Hz, 1sec.
On - 3 sec. Off
Internal Ring: 20Hz, 0.4 sec.On - 0.2 sec.
OFF
- 0.4 sec.On - 3 sec. Off
Recall:20Hz, 1sec. On - 1sec. Off
|
Ringing Type 2: Same Ringing Cadence as
DK.
External Ring: 20Hz, 0.4 sec. On - 0.2 sec.
Off
- 0.4 sec. On - 3 sec. Off
Internal Ring: 20Hz, 1 sec. On - 3 sec. Off
Recall: 20Hz, 1 sec. On - 3 sec. Off
|
Recall
|
A call is returned & needs to be
answered.
|
2 kHz interrupted at 10 Hz, 1 sec. On, 1 sec.
Off, repeat.
|
Recall for Standard
Telephone
|
A call is returned & needs to be
answered.
|
20 Hz, 1 sec. On, 1 sec. Off, repeat.
|
Ring Over Busy
(Internal)
|
Call rings an idle [DN] or CO line button
while phone is busy. Another internal call
offered to an idle button while the station
is busy.
|
2 kHz interrupted at 10 Hz, 1 sec. On, 3 sec.
Off, twice or repeat (For Call Waiting, twice
only).
|
Call Waiting (Internal)
|
Internal call is waiting for the busy
button. A call is camped-on to a busy
[DN] or CO line button.
|
Ring Over Busy
(External)
|
Call rings an idle [DN] or CO line button
while phone is busy. Another incoming
call is offered to an idle button while
phone is busy.
|
2 kHz interrupted at 10 Hz, 2 bursts of 0.25
sec. apart 0.25 sec., twice apart 3 sec. or
continuous (For Call Waiting, twice only).
Standard telephones with Caller ID also
receive an 80 ms burst of CAS tone at -14 to
32dBM
|
Call Waiting (External)
|
External call is waiting for busy station. A
call is camped-on to a busy [DN] or CO
line button.
|
Volume Control -
Ringing Speaker
|
Adjusts speaker volume for ringing state.
|
500/640 Hz continuous.
|
Other types of tones that do not fit in the previous categories are listed in Table 45.
Table 45 Administration/Programming Tones
Tone Name
|
Description
|
Ringing Cadence
|
Confirmation Tone
|
During user programming or administration mode, indicates the acceptance of input.
|
2 kHz two bursts of 0.125 sec. apart
0.125 sec.
|
Denial Tone
|
During user programming or administration mode, indicates the denial of input.
|
2 kHz 0.75 sec. On.
|
Volume Control - Beep
|
To adjust the beep volume.
|
2 kHz interrupted 10 Hz, continuous.
|
Appendix — Specifications
Strata Net IP and IPT Bandwidth Requirements
|