CIX Station, Line and Option Circuit Cards

The Circuit Cards are categorized as station, CO line or option cards (see Tables 21 ~23). Feature subassemblies that plug onto a universal slot circuit card are listed below the associated card. For details, see the Strata CIX I&M Manual.

Internet Protocol Telephone (IPT) Interface Unit (MIPU, LIPU/LIPS, GIPU and GIPH)

Provides IPT telephone circuits (IP5000-series, IPT2010-SD, IPT2020-SD and IPT2008-SDL)

1 100Base-TX RJ45 port

Built-in Digital Signal Processor (DSP) 1 RS-232 maintenance port

Network Address Translation (NAT) compatible for remote IP telephones when connected to a MIPU / LIPU.

Enhanced version of MEGACO+ for Voice over IP Supports SIP telephones and UIP200 Simultaneously supports Line interfaces.

MIPU16 – supports 16 IP channels (supported by CIX40 R1 and R2 cabinets)

MIPU24 – supports 24 IP channels (supported by CIX40 R2 cabinet)

LIPU-X1A – supports 16 IP channels

LIPS-X1A – supports 16 IP channels and mounts on LIPU LIPU/LIPS is not supported by CIX40

MIPU01_12 – supports 8 IP channels for CIX40 only MIPU01_12, GIPH-X1A – supports 8 IP channels for CIX40 only

Interface Options: LAN, Virtual Private Network (VPN) Internet, VPN WAN, Intranet.

Digital Telephone Interface Unit (ADKU, BDKU/BDKS, BWDKU1A)

Provides digital telephone circuits for DP5000- series, DKT3000/3200-series digital telephones. Stand-alone digital cordless telephone

DDM5060 console

DDSS3260 console

DDCB – Door Phone

Stand-alone digital cordless telephone DDM console

BATI – Digital Attendant Console

ADKU = 8 circuits (CIX100 only) BDKU = 8 circuits

BDKS = 8 circuits BWDKU = 8 circuits

Standard Telephone Interface Unit (LSLU - CIX200 only) (ASTU - CIX100 only)
Provides two standard telephone circuits. Maximum number of ringers per circuit is one.	Interface Options: Standard telephones (no message waiting lamp control - no OPS (48V)) Other single-line devices Alternate MOH/BGM source Fax machines Voice mail devices
Standard Telephone Interface Unit (Card Slot Mount) (BSLU/BSLS - All CIX Systems)
Provides eight (BSLU) or 16 (BSLU + BSLS) standard telephone circuits. Maximum number of ringers per circuit is one	Interface Options: Standard telephones (no message waiting lamp control) Other single-line devices Alternate MOH/BGM source Fax machines Voice mail devices No 48 Volt Off-premises Station support
Standard Telephone Interface Unit with Caller ID (Card Slot Mount) (BSTCIU - All CIX Systems, except CIX40)
Provides eight standard telephone circuits with Caller ID. Maximum number of ringers per circuit is three.	Interface Options: Standard telephones with Caller ID displays Message Waiting Lamp Control Off Premise Station (OPS) VM devices MOH / BGM
Standard Telephone Interface Unit (BSTU)
Provides 8 standard telephone circuits. Stutter dial tone is provided for Message Waiting audible indication.	Interface Options: Standard telephones Voice mail ports Off-premises stations Other similar devices Alternate MOH/BGM source Auto Attendant digital announcer Message Waiting Lamp Control Fax machines ACD announcer
-48 Volt Supply Internal Option (R48S)
Attaches to BSTU and BSTCIU 48VDC circuit for up to 8 standard telephone circuits. Not available on LSLU, BSLU/BSLS, ASTU	Interface Options: Optionally interfaces to the BSTU and BSTCIU to extend loop length of standard telephones from 600 ohms to 1200 ohms. Required for OPS operation.
Voice Mail
GVPH (CIX40 only)	Pre-programmed Voicemail Auto attendant circuit card. 4 Voice mail / Auto attendant ports default; 6 and 8 ports require LIC-2 GVPH 40 hours storage – 360 mail boxes Call record, Voice mail Call monitor and built-in modem
LVMU1A (CIX100, CIX200 and CIX670)	Pre-programmed Voicemail Auto attendant circuit card. 8 Voice mail / Auto attendant ports 40 hours storage – 360 mail boxes Call record, Voice mail Call monitor and built-in modem

Stratagy IVP8 R2 (CIX1 00, CIX200 and CIX670)	Supports up to 8 ports, approx. 15 hours of voice storage. 512MB CompactFlash card upgrade provides approx. 30 hours of voice storage. Circuit Card has flash memory, 2 RS-232 ports (1200~9600 bps) for local or remote PC interface. (See Stratagy General Description for details).
	Preprogrammed for plug-and-play in CIX Base or Exp., provides
	4~32 voice ports. Also supports fax server and Unified
Stratagy iES32 (CIX100, CIX200 and CIX670)	Messaging (UM). 10/100BaseT Ethernet connection and a serial port used for Toshiba Proprietary Integration (TPI). (See Stratagy
	General Description for details).
	The Stratagy iES16 is an integrated voice mail system that can be installed in a card slot inside a Strata CIX or CTX system.
	The Stratagy iES16 supports a maximum of 16 voice ports, and
Stratagy iES16 (CIX100, CIX200 and CIX670)	is available in model increments of 4 ports (4, 8, 12, 16 ports).
	The Stratagy iES16 also ships with Unified Messaging and 5 client seats standard, and can be configured for all of the advanced applications of the iES32, specifically up to 4 channels of fax and 8 channels of Text to Speech.

Strata Net Over VoIP Interface Unit (MIPU, LIPU/LIPS, GIPU and GIPH)
Provides 32 IP Strata Net channels 1 100Base-TX RJ45 port 1 RS-232 maintenance port Based on IP Strata Net standard protocol (ECMA-336) Voice coding G.711/G.729A Built-in Digital Signal Processor (DSP) Simultaneously supports IPT Station interfaces	MIPU16 – supports 16 IP channels MIPU24 – supports 24 IP channels LIPU-X1A – supports 16 IP channels LIPS-X1A – supports 16 IP channels and mounts on LIPU LIPU/LIPS is not supported by CIX40 MIPU01 _12, GIPH-X1A – supports 8 IP channels for CIX40 only Interface Options: LAN, Virtual Private Network (VPN) Internet, VPN WAN, Intranet.
SIP Trunking (MIPU)
Provides 24 IP Strata Net channels 1 100Base-TX RJ45 port 1 RS-232 maintenance port Voice coding G.711/G.729A Built-in Digital Signal Processor (DSP) Simultaneously supports IPT Station interfaces	MIPU16 – supports 16 IP channels MIPU24 – supports 24 IP channels
Internet Protocol (IP) Interface Unit (BVPU)
Provides 4 VoIP Circuits as E&M Tie lines 1 10Base-T port 1 RS-232 maintenance port H.323 standard for Voice over Internet Protocol (VoIP)	Interface Options: LAN, Internet, WAN.
Caller ID Interface Unit (RCIU2 / RCIS)
Provides 4 Caller ID circuits. With RCIS: 8 circuits.	Interface Options: Provides Caller ID LCD display for analog loop or ground start lines with Caller ID. Requires: RCOU, RCOS, RGLU2, RGLU3 or PCOU. Not compatible with T1.
Caller ID Interface Subassembly (RCIS) Attaches to the RCIU2.	Same as RCIU2.
Direct Inward Dialing Interface Unit (RDDU)
Provides 4 DID circuits.	Interface Options: DID analog lines.

Enhanced 911 CAMA Trunk Interface Unit (RMCU/RCMS)
E91 1 CAMA circuits. Provides up to 4 CAMA trunk circuits. The RMCU/RCMS eliminates the need for connection of adjunct terminal adapter equipment to E911 CAMA trunks. Requires 1 or 2 RCMS circuit cards for 2 or 4 CAMA lines respectively.	E911 analog CAMA trunks.
CAMA Trunk Subassembly (RCMS) RCMS attaches to RMCU. Provides 2 E911 CAMA circuits. Up to 2 RCMSs per RMCU for 4 CAMA lines max. (1 RCMS comes packaged with the RMCU.)	Same as RMCU.
Ground/Loop Start Interface CO Line Interface Unit (RGLU3)
Provides 4 ground or loop start line circuits. Each can be individually set for ground or loop start operation.	Interface Options: Analog loop or ground start analog lines.
ISDN Primary Rate Interface Unit (RPTU and BPTU)
Provides (1~8B + D), (1~16B + D), or (1~23B + D) channels (lines), depends on system programming. RPTU2 is required for Strata Net Networking.	Interface Options: ISDN PRI POTS FX Tie (senderized) Tie (cut through) OUTWATS (intra-LATA) and (inter-LATA) InWATS Strata Net
Loop Start CO Line Interface Unit (RCOU3A and RCOS3A)
Provides 4 CO analog loop start line circuits. With RCOS, provides 8 CO analog loop start line circuits.	Interface Options: CO analog loop start lines
Loop Start CO Line Interface Subassembly (RCOS) Provides 4 additional Loop Start CO lines. 1 RCOS subassembly per RCOU.	Same as RCOU. RCOU/RCOS requires RCIU2/RCIS to support Caller ID.
Loop Start CO Line Interface with Caller ID Unit (BCOCIU1A)
Provides four CO analog loop start line circuits. With BCOCIS1A, provides eight CO analog loop start line circuits. Caller ID interface is built-in, RCIU is not needed.	Interface Options: CO analog loop start lines (Does not support Type 2 Hook-Flash to answer a waiting call, does not provide dial pluse output)
Loop Start CO Line Interface Subassembly (BCOCIS1A) Provides 4 additional Loop Start CO lines with built-in Caller ID interface. Mounts on the BCOCIU1A.	Same as BCOCIU1A.
T1/DS-1 Interface Unit (RDTU)
Provides T1 (DS1) Interface: 1~8, 1~16, or 1~24 channels (lines), depends on system programming.	Interface Options: T1 Loop start lines Ground start lines Tie lines (wink or immediate) DID/DOD lines (wink or immediate)
Remote Expansion Cabinet Unit (RRCU)
Supports 2 CIX670 Remote Cabinets. 62.5 mì, multi-mode fiber.	Remote Cabinet not supported by main system reserve power.

The Functional Block Diagrams show the circuit cards and interface connectors used for connecting the stations and peripherals (see Figures 11~15).

This chapter covers Toshiba’s 5000-series Digital Telephones (DP), Internet Protocol Telephones (IP) and peripherals that are compatible with Strata CIX telephone systems.