CIX License Control

The system size and feature capability is controlled using a software License Key Code. This key code is obtained from the Toshiba Internet FYI site during the ordering process and is installed onto the system processor via CIX eManager. Processor license codes activate system hardware capacities.

Additional sets of four CO line/digital station ports beyond the Basic bundled number of ports requires one LIC-4 BASIC license. See table below.

DTMF tone receiver circuits are required for standard telephones, Voice Mail DTMF integration, Tie, DID and DNIS line service.

16 DTMF built-in receiver hardware circuits and 16 ABR circuits – The first four DTMF circuits and all ABR circuits do not require a license. Each additional set of four DTMF receiver circuits require one LIC-4 DTMF license (maximum of 16 DTMF circuits).

IP End Point licenses are required for IPT, SIP and SoftIPT phones.

The optional RS-232 serial port interface (BSIS) provides two circuits to interface with SMDI or Toshiba Proprietary Voice Mail integration, Call Accounting SMDR, and two for future

applications. The first circuit does not require a license, but circuits two through four each require one LIC-SER PORT license.

Refer to the “Strata CIX Software License Requirements” on page 177 for license part numbers and hardware configurations.